Skip to content Skip to main navigation Skip to footer

How to Restring an Electric Guitar

[vc_row][vc_column][vc_column_text]Many people can play guitar but end of paying someone at a music store to string their guitar for them. If you want to save some money you can learn how to restring your electric guitar yourself.

1) You start with the low E string, pull through the tailpiece and position it in place.

2) Put the bridge back and  pull the string through the tuner hole.  You keep tension on the tail piece so it stays in place.

3) Next your right hand should be over the fingerboard and under the string at the 7th fret.   Take the slack and wrap it once over the top, and bend the string so it’s out of your way.

4) You start winding in a counter clockwise motion (you can use a peg string winder so you can restring your guitar in a fraction of the time).

5) You repeat the rest of the strings in the same way (A, D, G, B, E).  Make sure you bend the string a little and guide the ball end into the tailpiece.  The strings should always wrap towards the inside of the peg head.

6) Tune the guitar and

7) Clip the strings as close as possible to the tuning post[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_cta_button call_text=”Click the Button on the Right for the Complete Learn & Master Guitar Setup & Maintenance Course” title=”Click Here Nor For More Guitar Setup & Maintenance Training” target=”_blank” color=”btn-danger” icon=”none” size=”wpb_regularsize” position=”cta_align_right” href=”/GuitarSetupMaintenanceRestringGuitar”][/vc_column][/vc_row]

Was This Article Helpful?


There are no comments yet

Leave a comment

Your email address will not be published. Required fields are marked *